How can the torque wrench calibrator be used longer

With the development of the torque wrench, torque wrench tester industry got rapid development, more and more people to the torque wrench instrument is very popular, but if you want to achieve greater development of the industrial economy, must want to use torque wrench tester and so on equipment, the first condition is to keep the torque wrench tester is longer, how to use the torque wrench tester is longer? Small series introduction as follows:

First of all, in the actual operation process, the action should be slow, the intensity should be moderate, do not * too large wrench operation, otherwise easy to cause damage to the torque wrench tester. If you are constantly under too much force, the precision of the torque wrench will also decrease.

Second, when the torque wrench tester is not used, it should be transferred to the minimum index, so that the spring plays a protective role, so that the spring is in a relaxed state. Then, the life of the torque wrench tester will be extended.

Three, fixed parts. Torque wrench tester in the long-term use of the process, parts will inevitably loose, so should be adjusted in a timely manner.

Fourthly, the torque wrench tester should not be placed in a place with water when it is used. If it is placed in a water environment for a long time, the parts will rust and the measurement accuracy will decrease.

The methods to extend the life of torque wrench are as follows

1: storage: when the torque wrench is used by the force value or needs to be idle for a long time, in order to keep the precision of the force value of the wrench unaffected, we need to adjust its force value to the minimum before it can be stored. And should pay attention to store it in a dry environment, in order to protect the wrench from acid and alkali corrosion, after stored for a period of time, the parts of the flexibility and accuracy of force value will remain the same.

2: use: when using a torque wrench, the force should be moderate and stable, because whether the force is too strong or * too strong may be on the wrench force value.